Sichuan Kelixin New Materials Co., Ltd

KLX-928 Silicone Structural Sealant

Keywords :

Silicone structural sealant / construction adhesive / Silicone sealant adhesive


  • Hits : 108
  • Release Time : 2019-07-24 17:05:13
  • Company : Sichuan Kelixin New Materials Co., Ltd
  • Mobile : +8618183320574
Contact Us

Details

Contact Us

Five Advantages Of Products

  • Easy to use,it can keep good consistency and easy to extrude at - 25 - 50 ℃;
  • Neutral curing: suitable for most building materials without adverse reactions or corrosion;
  • Excellent cohesiveness: No base primer required, and can form a strong cohesive force with most building materials;
  • Excellent aging stability and good compatibility with other neutral silicone adhesives;
  • After curing, it has high modulus performance and can bear the expansion displacement capacity of the interface ±25%.

Product Details

KLX-928 Silicone Structural Sealant

KLX-928 silicone structural adhesive is a kind of one-component, neutral curing sealant, specially designed for structural bonding assembly in building of curtain wall. It can be easily extruded at high temperature and solidified into excellent, durable, high modulus and high elasticity silicone rubber after curing with moisture in the air.

Product Features

This product is suitable for most building materials and it can produce superior bonding without any base primer.

1.Easy to use,it can keep good consistency and easy to extrude at - 25 - 50 ℃.

2.Neutral curing: suitable for most building materials without adverse reactions or corrosion.

3.Excellent cohesiveness: No base primer required, and can form a strong cohesive force with most building materials.

4.Excellent aging stability.

5.After curing, it has high modulus performance and can bear the expansion displacement capacity of the interface ±25%.

6.It has good compatibility with other neutral silicone adhesives.

Noted: Structural assemblies shall be submitted to the company for testing and auditing in advance along with material samples and assembly drawings.

Main Applications

KLX-928 silicone structural adhesive for building is specially designed for structural bonding and assembly of building curtain wall. The possible structural applications are assembly between metallic materials and glasses which are assembled in advance. After fully cured, a durable, resilient waterproof interface will be formed to support the structural strength of the building.

1.Structural bonding and sealing of glass, stone, aluminum curtain wall and metal structure engineering;

2.Structural adhesive sealing of insulating glass;

3.Many other constructions or assembly with high requirements of bonding and safety.

Usage Restrictions

KLX-928 silicone structural adhesive sealant is not suitable for structural assembly use and the following conditions:

1.All materials that ooze grease, plasticizer or solvent, some unvulcanized or partially vulcanized rubber and adhesive tapes;

2.The construction part that is not ventilated since silicone sealant needs moisture in the air to solidify;

3.Long-term immersed and year-round underground damp environment;

4.Paint surface, because the cracking or peeling of the paint film may cause the failure of sealing;

5.Frosted or damp surface;

6.Surfaces with direct contact with food;

7.Areas susceptible to mechanical wear;

8.Areas with fireproof sealing demand;

9.Not advisable to construct when the surface temperature of the material is lower than 4℃ or exceeds 40.

Construction Advice

1.Clean the interface before using, if necessary, use special solvents to clean and keep dry. If primer is used to enhance the adhesion, it must be constructed after the primer is dried.

2.Completely filling to the joint to ensure bonding on both sides during construction.

3.Adhesive tapes should be affixed to the place where protection is needed, but the tape should not touch the surface to be constructed.

4.Trim immediately before curing to achieve a beautiful appearance.

Safety Attentions

1.Maintain a good ventilation environment at sealant construction site; and

2.keep out of reach of children to avoid eating by mistake;

3.If the eyes are inadvertently exposed to the uncured adhesive, promptly wash with plenty of clean water and ask help from a doctor.

Storage & Validity

1.KLX-928 Silicone structural Sealant belongs to non dangerous goods, it should be stored in the original packaging under dry and ventilated conditions with temperature at 27 ° C or lower.

2.The product shelf life is 12 months from the date of production.  


Sichuan Kelixin New Materials Co., Ltd

Name:  Victor Hu

Mobile:  +8618183320574

Tel:  +86 15106971219

Address:  Plant address: #97 Xingye Road, Shuikou town, Leshan City, China Office address: #555, Yizhou Avenue, High Tech Zone, Chengdu City, China

Website:  www.klxnm.com

PREVIOUSKLX-717 Stone & Marble Silicone W...

NEXTKLX-818 Two Component Insulating ...

Inquiry :

Inquiry

Hot Recommendation

Shrink