Sichuan Kelixin New Materials Co., Ltd

Defoamer for Oilfield of Petroleum Industry

Keywords :

Anti foaming agent / oilfiled chemical defoamer / defoaming agent for oildfield


  • Hits : 53
  • Release Time : 2019-07-24 17:06:37
  • Company : Sichuan Kelixin New Materials Co., Ltd
  • Mobile : +8618183320574
Contact Us

Details

Contact Us

Five Advantages Of Products

  • Silicone oil based defoamer no toxicity and residue, no secondary pollution to paper quality, working fluid and environment.
  • Fast speed of defoaming, long time in restrain of foaming.
  • Good dispersibility, high dissolution rate.
  • High temperature resistance
  • Low dosage to save the cost

Product Details

Defoamer for Oilfield of Petroleum Industry

Oilfield defoamer is a kindy of anit-foaming agent specially made for oil filed development, based on the research of foaming mechanism of a large amount of foam due to many factors like mechanical action, surfactant factor, organic matter biochemical reaction etc., in the petroleum industry from drilling and crude oil transportation to refining and processing. The company develops the special defoaming agent for the petroleum industry, which is made through modification of polysiloxanes (silicone, silicone emulsions, etc.) and extension grafting of the branched chains, then mixed with special oils and higher alcohols for molecular recombination polymerization and emulsification.

1.  KJ507 Defoamer for Oilfield

The oilfield-specific defoamer is a type of silicone composite defoamer.

1) It can eliminate the foam formed in the mud due to the overflow of natural gas during the oilfield drilling process.

2) It can also eliminate foams which is formed due to the excessive use of surfactant as well as the foam produced by various gases generated by pyrolysis or fermentation of the treatment agent;

3) During oil extraction, especially in the case of marine oil recovery, if there is pressure drop of the oil layer, the seawater water will be injected, and then the foam will be generated by the degassing and vacuuming process. All these foams can be timely defoamed by our KJ 507 defoamer.

2. KJ517 Oilfield Defoamer for General Purpose

This product is not only suitable for the defoaming of oilfield drilling mud, but it can also eliminate and restrain of foam in the process of oil and gas separation, demulsification and dehydration of the crude oil, crude oil transportation etc., to improve the equipment operation rate and output.

Usage Restrictions

1. This oilfield defoamer can be directly added to various water-based drilling systems to eliminate various foams.

2. If the defoamer is used to prepare mud, it should be added simultaneously with the addition of soil particles and stone powder, and then add lignosulfonate to suspend the slurry. If the foam is still more, the appropriate dilution of the product can be supplemented, recommend solubility is 5-10 %.

3. The dosage of defoaming agent to be used can be adjusted in the ratio of two or five in one hundred thousand (2-5: 100,000) with the base mud, it can be calculated either by volume ratio or by weight ratio.

4. If the defoamer is used in the offshore oil production of seawater degassing process, it must be added before the water come into the vacuum tower or added with the seawater simultaneously.

5. If the defoamer is used in the oil and gas separation process during the watery oil transportation especially those crude oil with water content is 30-40%. The defoamer should be uniformly and continuously added according to the volume to be treated or oil to be transported. In this way, the effect is the best with least dosage.

Packaging, Storage & Transportation

1. Packaged in 50kg and 200kg plastic drums or iron drum, or 1000Kg barrel;

2. Product should be stored indoors, to avoid sun exposure and heat source; if there is slight stratification, the effect will not be affected after mixing.

3. Storage period is 6 months, without any stratification and precipitation;

4. This product is non-toxic, non-inflammable, so it can be stored and transported according to general chemicals.


Sichuan Kelixin New Materials Co., Ltd

Name:  Victor Hu

Mobile:  +8618183320574

Tel:  +86 15106971219

Address:  Plant address: #97 Xingye Road, Shuikou town, Leshan City, China Office address: #555, Yizhou Avenue, High Tech Zone, Chengdu City, China

Website:  www.klxnm.com

PREVIOUSEmulsified Silicone Oil Defoamer ...

NEXTSilicone Defoamer with General Pu...

Inquiry :

Inquiry

Hot Recommendation

Shrink